Water jetting surface preparation exposes suitable substrates for inspection, coating or repair. The treatment follows the preparation requirements of the next coating, inspection or repair stage. A surface can appear free of dirt while still failing a coating or repair requirement for contamination, moisture or condition.
Water Jetting Surface Preparation
Water jetting surface preparation for coating, inspection or repair. Pure-water jetting can expose an existing steel profile; follow-on checks still apply.
HomeWater Jetting Surface PreparationWater Jetting Surface Preparation enquiry
Surface cleanliness and profile
Pure-water jetting can expose an existing steel profile but does not create a new abrasive-blast profile.
Washwater and recontamination
Removed material is recovered with the washings and the prepared surface is protected before the next treatment.
Surface cleanliness and profile
Pure-water jetting on steel can reveal an existing profile, but it does not create a new abrasive-blast profile. Concrete preparation is different and may involve removal to a specified depth. The coating supplier or repair designer’s required condition therefore guides the method, representative trials and checks during treatment.
Discuss water jetting surface preparation
Complete the form and we will get back to you.
Washwater and recontamination
Removed coating, corrosion products or process material are collected with the washings and handled according to what they contain. The treated area is protected from spray drift and new contamination. Wet-cleaned steel can develop flash rust, so timing and protection before painting have to reflect the selected coating system.
Coating readiness and follow-on checks
The finished area is compared with the agreed preparation requirement, with inaccessible edges and retained material identified. Additional preparation may still be needed before coating or repair. Cleaning completion is not a substitute for the next trade’s acceptance checks, and the exposed surface needs protection until that stage begins.
Water Jetting Surface Preparation: common questions
Does visually clean mean ready to coat?
No. Profile, moisture and contamination may need further checks against the coating specification.
Can pure-water jetting create a new steel blast profile?
No. Pure-water jetting may expose an existing profile, but it does not create a new abrasive-blast profile.
Is concrete preparation identical to steel preparation?
No. The materials and intended removal or repair requirements differ.
Can flash rust develop before coating?
Yes. The acceptable condition and timing depend on the coating system.
Why protect the surface after cleaning?
New contamination can compromise the preparation before the next treatment begins.