We provide high pressure jetting for suitable cleaning of process pipework, heat exchangers, drainage and hard surfaces in factories, manufacturing plants and other operational facilities. The deposit and equipment condition are considered alongside process isolation because cleaning can release residues that were hidden before the equipment was opened.
High Pressure Jetting for Industrial Sites
Industrial high pressure jetting for process equipment, pipework, drains and surfaces. Isolation and washwater handling reflect the process.
HomeHigh Pressure Jetting for Industrial SitesHigh Pressure Jetting for Industrial Sites enquiry
Process equipment
Pipework, exchangers and other equipment are cleaned with methods suited to their construction and accessible surfaces.
Isolation and residues
Residual pressure, temperature, contents and cleaning residues are controlled under site maintenance arrangements.
Cleaning is not integrity testing
Deposit removal can expose condition but does not prove pressure integrity or readiness for restart.
Water jetting around process equipment
Pipework, tube bundles, vessels and hard surfaces place different limits on access and cleaning contact. Pressure is only one part of the method; flow, nozzle choice and the condition of the material beneath the deposit also matter. Cleaning can expose corrosion or wear but does not repair the component or prove pressure integrity.
Deposits, isolation and retained equipment
Residual pressure, temperature and contents are dealt with under the site’s maintenance arrangements before affected equipment is opened. Connected processes must not introduce fresh material during cleaning. Tube cleaning and whole-exchanger cleaning remain separate where the selected access reaches different internal surfaces.
Discuss industrial high pressure jetting
Complete the form and we will get back to you.
Process residues and hazardous substances
Operating history helps establish what cleaning may release. Where the work can expose people to substances hazardous to health, the linked HSE sector or activity guidance applies alongside the controls for the jetting task. Used cleaning water is handled according to the contamination it carries. Confined-space entry is avoided where possible and requires separate competence and emergency arrangements when necessary.
Cleaning results before maintenance or restart
We identify treated areas and anything left inaccessible or obstructed. Leak tests, pressure tests and recommissioning remain separate from cleaning where the maintenance plan requires them. A visibly clean surface is not evidence that the equipment is fit for service.
High Pressure Jetting for Industrial Sites: common questions
Can industrial jetting be carried out on live process equipment?
Live cleaning must not be assumed suitable. Isolation and the site's maintenance controls depend on the particular equipment and process.
Does water-only cleaning make the waste harmless?
No. Used water can carry the process material, corrosion products or coating debris removed during cleaning.
Is heat exchanger tube cleaning the same as cleaning the whole exchanger?
No. Tube-side cleaning reaches different surfaces from shell-side, header or other exchanger cleaning.
Does cleaning prove equipment is ready to restart?
No. Integrity testing and recommissioning checks remain separate where they are required.